Specific for wood, excellent for restoration works

Specific product for APPLICATION ON WOOD. It removes all kind of paints: polyurethane, polyester, nitrocellulose, acrylic, epoxy, synthetic and oil-synthetic paints, putties and so on without bleaching nor staining nor damaging the wood. It is particularly suitable to restoration works of ancient furniture , for crafts and for “do-it-yourself” sector.

Avoid: any application on plastic materials and on fibreglass.
Yield: around 2 mq/l (according to the operator, to the kind and thickness of the paint, to the properties of the surfaces and of environmental temperature)
Working times: 2-30 minutes according to kind, thickness and conditions of used paint. More coats need more applications.
1-2 hours for polyester paints.
Application: Apply 2 – 3 mm. thickness of paint remover on the handmade item, let it working, then remove any trace of product and paint with a rag or with a spatula (traditional way), or strew with some sawdust and then remove it with an abrasive wool.
Peculiarity: removable and washable with water; children proof caps; chemically neutral. Due to the thickness of its paste, it is difficult to be spread on vertical surfaces; the manufacturer suggests to spread it on horizontal surfaces.
Advise: do not shake before using it. Open the cap carefully because the product could come out violently because of pressure. Then cover the outlet with a rag and take away slowly the opening ring, up to provoke venting and keep always the can far from the face. Use protecting glasses and gloves during the application, keep the can well closed and far from any heat source and in fresh and dry environment. Do not apply on surfaces which are hot or exposed to the sun. Any responsibility for damages caused by a not proper use will be refused by the manufacturer.
It is suggested to use this product within three months from the date of purchase.